24h
RESPONSE
Answers inside one working day
Send a drawing, a photo of the fixture or a cycle-time question. An application engineer replies with a machine suggestion, not a price list.
TECHNICAL SUPPORT
A machine is only half of the answer. The other half is the drawing review, the fixture, the tooling list and the person who picks up the phone when a cycle time does not match the quote.
24h
RESPONSE
Send a drawing, a photo of the fixture or a cycle-time question. An application engineer replies with a machine suggestion, not a price list.
15
YEARS
Every family we sell has been through generations of shop-floor corrections — the kind that only show up after thousands of hours in a customer plant.
7d
TEST CUT
We clamp your part, cut it on the machine we are proposing and send back the cycle time, the inspection report and the video.
TECHNOLOGY EVOLUTION
Four industrial revolutions, one direction: less hand work, more measurable output.
1780s
Water and steam drive the first machines. The operator sets the depth by hand and the part is checked with a caliper.
1910s
Electric motors and assembly lines split the work into steps. Dedicated machines repeat one operation all day.
1970s
CNC, PLC and the first machining centres. Programs replace hand wheels and the tool changer replaces the operator’s hand.
2010s
Machines report tool life, spindle load and alarms over the network, so a problem is diagnosed before it becomes a stop.
WHERE WE ADD VALUE TODAY
ONLINE TEST CUT
Four steps, no cost before step 02, and the decision is made on measurements — not on a catalogue photo.
A drawing, a 3D file or a sample part. Include the material and the tolerance that actually decides the part.
We check tool reach, clamping and the number of setups, then confirm which machine family fits before any cost is quoted.
Your part is machined on the proposed machine with production tooling — not with a demo aluminium block.
Cycle time, inspection measurements, photos and video come back with the cut part, so the decision is based on evidence.
You get back
YOUR REQUIREMENTS
Table size, configuration and control system are the three answers that change a quotation most. Everything else we can confirm afterwards.
DOCUMENTS
One page per family: travel, table, spindle, tooling and accuracy. Print it for the meeting, or send it to your customer.
ONLINE SUPPORT
Alarm code, tooling question, commissioning check — write, call or share the control screen. We keep the machine's parameter file on record, so the answer does not start with “which model again?”.
Mon–Sat · 08:30–20:00 (GMT+8) · emergency line for machines under commissioning
TECHNICAL DATA SHEET
Series datasheet · PDF, 1 page
Tell us where to send follow-up questions and the PDF opens immediately. No newsletter, nothing shared.
Used to follow up on this request only. See our privacy policy.