TURNING SERIES
CP-Series Power Turret Lathes
CP-52P power turret lathes: resin-sand cast base, high-precision spindle and bearings for high-hardness, heavy-cut parts, with a servo turret.
View detailsTURNING SERIES
The CK-series is the lathe that carries the volume in a shop: a slant-bed casting, a universal spindle unit and a control that operators already know. Nothing about it is exotic, and that is the point — it holds size on a long run and it is cheap to keep running.
On medium-sized parts produced in volume, the cost of the part is set by cycle time and by how often the machine is adjusted. A rigid, thermally stable bed and a spindle unit that is easy to service keep both under control.
Figures are as published for this model — final values are confirmed on the quotation.
| Max. swing over bed | Ø380 mm |
|---|---|
| Max. turning diameter (disc type) | Ø260 mm |
| Spindle through hole | Ø45 mm |
| Max. bar diameter | Ø45 mm |
| Max. spindle speed | 5,000 rpm |
| Spindle head type | A2-5 |
| Main motor power | 7.5 kW (servo) |
| Axis travel (X / Z) | 900 / 300 mm |
| Rapid traverse (X / Z) | 24 m/min |
Atomiser bodies, sensor housings, fittings, connector shells, pins, bushings and small shafts — high-precision medium parts where the run is long and the tolerance is tight.
Send the part drawing, the bar size and the monthly volume, and we will confirm the spindle, the axis travel and the automation that fits the run.
Tooling & configuration
Volume turning of medium parts — repeatable tool setting matters more than exotic tooling.
Not sure what you need? Send the part drawing, the material and the batch size — we return a tooling list and a configured machine price, both on the same quotation.
QUOTE REQUEST
CK-Series CNC Lathes
INDUSTRIES
Parts we build these machines around, quoted from your drawing.
Brackets, housings and drivetrain parts machined in one setup.
Aluminium frames, middle plates and heat sinks with fine surface requirements.
Battery trays and module structures with long, flat surfaces to hold tolerance.
Core and cavity work where contour accuracy drives the final finish.
Compressor housings, motor casings and steel panels produced in volume.
Hinges, handles and fasteners machined from bar stock, finished evenly.
HOW WE WORK
Six steps, each with a document you can hold us to.

A drawing, a 3D file or a sample part is enough to start.

Our engineers match the part to the right machine family and quote it.

Spindle, travel, tooling and control options confirmed in writing.

Assembly, wiring and a test cut on your part before shipment.

Export packing, documentation and on-site commissioning support.

Operator training, spare parts and remote diagnostics after the sale.
TECHNICAL DATA SHEET
Series datasheet · PDF, 1 page
Tell us where to send follow-up questions and the PDF opens immediately. No newsletter, nothing shared.
Used to follow up on this request only. See our privacy policy.