TURN-MILL SERIES
CK-Series Turn-Mill Centers
CK-52YD turn-mill centers: turning plus polygon milling in one clamping — outer diameter, drilling, parting and multi-sided forms in a single cycle.
View detailsDRILLING & TAPPING SERIES
A drilling and tapping center is built around one job: put holes and threads into a part as fast as possible. It trades milling envelope for spindle speed and tool-change time, and that trade is what makes it pay off on plate work and small housings.
When a part is mostly holes, threads and light milling, a general-purpose vertical machining center spends its cycle waiting for the tool changer. The T-series removes that waiting: 48 m/min rapids, a direct-drive spindle and a 21-tool servo magazine that changes tools without a pause.
Four models share the same spindle and control. Figures are as published for this series — final values are confirmed on the quotation for the model you order.
| Item | T-6 | T-650 | T-7 | T-850 |
|---|---|---|---|---|
| Worktable travel (X) | 640 mm | 640 mm | 700 mm | 800 mm |
| Saddle travel (Y) | 420 mm | 500 mm | 400 mm | 500 mm |
| Spindle box travel (Z) | 350 mm | 350 mm | 350 mm | 350 mm |
| Spindle nose to table | 130–480 mm | 150–500 mm | 145–495 mm | 110–510 mm |
| Spindle center to column | 475 mm | 550 mm | 445 mm | 550 mm |
| Worktable size | 700 x 420 mm | 700 x 470 mm | 800 x 420 mm | 800 x 470 mm |
| Table load | 300 kg | 300 kg | 300 kg | 400 kg |
| T-slot (slots – width x pitch) | 3 – 14 x 105 | 5 – 14 x 65 | 3 – 14 x 125 | 5 – 14 x 80 |
| Motor power | 5.5 / 7.5 kW | 5.5 / 7.5 kW | 5.7 / 7.5 kW | 5.5 / 7.5 kW |
| Motor torque | 7 N·m | 7 N·m | 7 N·m | 7 N·m |
| Spindle speed | 20,000 rpm | 20,000 rpm | 20,000 rpm | 20,000 rpm |
| Spindle diameter / taper | Ø100 / BT30 | Ø100 / BT30 | Ø100 / BT30 | Ø100 / BT30 |
| Cutting feed range | 5–20,000 mm/min | 1–15,000 mm/min | 5–20,000 mm/min | 1–15,000 mm/min |
| Rapid traverse (X/Y/Z) | 48 m/min | 48 m/min | 48 m/min | 48 m/min |
| Tool capacity | 21, servo magazine | 21, servo magazine | 21, servo magazine | 21, servo magazine |
| Dimensions (L x W x H) | 1860 x 2300 x 2300 | 1980 x 2320 x 2400 | 1980 x 2320 x 2400 | 2200 x 2300 x 2450 |
Phone and tablet frames, camera housings, heat sinks, e-cigarette bodies, watch cases, small brackets and any aluminium or zinc part with a dense hole pattern. The pattern is the same: many holes and a few threads, a short cycle, and a machine that must not spend its time changing tools.
Send the part drawing, the hole pattern and the yearly volume, and we will confirm the travel, the table and the tooling package that matches it.
Tooling & configuration
Hole-heavy parts at 20,000 rpm — tooling sized to the tap and drill range you actually run.
Not sure what you need? Send the part drawing, the material and the batch size — we return a tooling list and a configured machine price, both on the same quotation.
QUOTE REQUEST
T-Series High-Speed Drilling & Tapping Centers
INDUSTRIES
Parts we build these machines around, quoted from your drawing.
Brackets, housings and drivetrain parts machined in one setup.
Aluminium frames, middle plates and heat sinks with fine surface requirements.
Battery trays and module structures with long, flat surfaces to hold tolerance.
Core and cavity work where contour accuracy drives the final finish.
Compressor housings, motor casings and steel panels produced in volume.
Hinges, handles and fasteners machined from bar stock, finished evenly.
HOW WE WORK
Six steps, each with a document you can hold us to.

A drawing, a 3D file or a sample part is enough to start.

Our engineers match the part to the right machine family and quote it.

Spindle, travel, tooling and control options confirmed in writing.

Assembly, wiring and a test cut on your part before shipment.

Export packing, documentation and on-site commissioning support.

Operator training, spare parts and remote diagnostics after the sale.
TECHNICAL DATA SHEET
Series datasheet · PDF, 1 page
Tell us where to send follow-up questions and the PDF opens immediately. No newsletter, nothing shared.
Used to follow up on this request only. See our privacy policy.