Skip to content
CNCFACT Machine Tools
CNC vertical machining center cutting a steel component inside a dark machine shop

01 CNC Machine Tools

Machine tools built for production, not for the brochure.

Seven families of CNC machine tools — drilling & tapping centers, high-precision machining centers, a five-head five-axis machine, turn-mill centers, power turret lathes, CNC lathes and vertical five-axis machining centers — assembled and test cut in our own plant in Guangdong.

CNC machine tool cutting a metal part with coolant on a shop floor

02 Technical Service

Before you buy, and long after.

Trial cut on your part, operator and programmer training, retrofit and upgrade, and process engineering — the four things a machine purchase actually needs.

CNC machine tool assembly plant with rows of machines and engineers in the aisle

03 Own factory, own brand

One supplier, from casting to test cut.

Design, assembly, alignment, test cut and spare parts all happen in the same building — so the answer to a problem does not have to travel through a trading company.

01 — Machine tools

Seven machine families. One production standard.

Every machine is assembled, aligned and test cut in our own factory before shipment. Choose the platform that fits your part — we configure spindle, control and automation around it.

T-650 high-speed drilling and tapping center with 21-tool servo magazine

01 / Drilling & Tapping

High-Speed Drilling & Tapping Centers

T-series drilling and tapping centers built for hole-heavy parts: 48 m/min rapids, a 20,000 rpm direct-drive spindle and a 21-tool servo magazine.

Model
T-6 / T-650 / T-7 / T-850
Spindle
20,000 rpm, BT30
Rapid traverse
48 m/min on X, Y and Z
Best for
Phone frames, heat sinks, small housings
View specifications
V-8 high-precision vertical machining center with 24-tool magazine

02 / High-Precision VMC

High-Precision Vertical Machining Centers

V-series machining centers with a bed built to absorb high-G inertia, a short-nose spindle and 24-tool tool change — for moulds, die plates and steel parts.

Model
V-8 / V-866 / V-1165
Spindle
12,000 rpm, BT40, Ø140–150
Rapid traverse
up to 48 m/min
Best for
Mould plates, die shoes, frames
View specifications
T-640 five-head five-axis machine with five 24,000 rpm spindles

03 / Five-Head Five-Axis

Five-Head Five-Axis Machine

T-640 with five spindles cutting at once — 3.2 kW and 24,000 rpm per head, with no tool change inside the cycle. Built for small parts in volume.

Model
T-640
Spindles
5 x 3.2 kW, 24,000 rpm
Tool change
None in cycle — one tool per head
Best for
Watch cases, jewellery, e-cigarette parts
View specifications
CK-52YD turn-mill center with 12-station turret and polygon turning

04 / Turn-Mill

Turn-Mill Centers

CK-52YD turning and milling in one clamping — outer diameter, drilling, parting and three- to seven-sided forms in a single cycle.

Model
CK-52YD
Bar capacity
Ø52 mm, A2-6 spindle
Spindle motor
17 kW, 4,000 rpm
Best for
Valve stems, fittings, connector shells
View specifications
CP-52P power turret lathe with resin-sand cast base and servo turret

05 / Power Turret

Power Turret Lathes

CP-52P with a resin-sand cast base and a high-precision spindle on precision bearings — built to hold size through heavy cuts in hard material.

Model
CP-52P
Bar capacity
Ø52 mm, 8-inch chuck
Accuracy
±0.003 mm repeat positioning
Best for
Hardened shafts, fittings, bearing rings
View specifications
CK-46 slant-bed CNC lathe with Meehanite cast iron bed

06 / CNC Lathes

CNC Lathes

CK-46 slant-bed lathe in Meehanite cast iron with secondary annealing — the volume machine for high-precision medium parts.

Model
CK-46
Bar capacity
Ø45 mm, A2-5 spindle
Spindle speed
5,000 rpm, 7.5 kW servo
Best for
Atomiser bodies, sensors, fittings
View specifications
LV-856 vertical five-axis machining center with rotary cradle

07 / Vertical Five-Axis

Vertical Five-Axis Machining Centers

LV-856 with a DTR260-500 cradle, ±120° A-axis and a BT40 long-nose direct-drive spindle — for impellers, blades and complex surfaces.

Model
LV-856
Travel
XYZ 800 x 550 x 600 mm
Cradle
A ±120°, 259 N·m rated torque
Best for
Impellers, blades, marine propellers
View specifications
Engineer reviewing a part drawing, machine specifications and technical requirements with a customer

06 / Not sure yet

Send the part, not the problem.

A drawing, the material and the batch size are enough for us to say which of the seven families we would put your part on — and what it would cost per piece.

  • Part sampling before you commit
  • Equipment specifications and options
  • Technical requirements review
  • Online consultation welcome
Explore CNC machines
CNC machine trial cutting a customer part with inspection tools on a workshop bench
4 Service lines

02 — Technical service

Before you buy, and long after.

A machine is only useful once your part comes off it. We trial cut your part before you commit, train the people who will run it, upgrade the machine as your work changes, and help with the process when a tolerance will not hold.

  • Trial cut — the machine proves itself on your drawing
  • Operator and programmer training, in English
  • Retrofit and upgrade as your part mix changes
  • Process engineering — fixture, tooling, parameters, cycle time
Trial cutBefore you commit
TrainingManuals and walk-through
RetrofitAxes, spindle, control
Technical service in detail

03 — Industries

Where our machines and parts go to work.

Five industries, one common requirement: repeatable accuracy at production speed. Our application team configures each machine around the parts you actually make.

04 — Customers

Trusted by machine shops in Southeast Asia and Europe.

From single-machine workshops to multi-line tier suppliers, our machines run in daily production. A selection of customers is shown below.

Company film · --:--
00:00 00:00

05 — About our plant

A machine tool builder with its own production floor.

CNCfact designs, assembles and tests CNC machine tools in Guangdong, China. Our engineers join at the first enquiry — trial cut, configuration, training and retrofit — and the service team stays long after commissioning.

Because the machines are built, aligned and test-cut under one roof, problems are solved before they reach your shop floor — and spare parts come from the same building that built your machine.

5Machine families
In-houseAssembly and test cut
EnglishDocs and support
DirectFactory to your floor
Inside the plant — profile, team, honours and certificates

06 — Why CNCfact

Six reasons buyers keep coming back.

Machines are only half of a purchase decision. The other half is who answers the phone in year five — and whether the part still meets tolerance.

01

An international machinery partner

We supply machine tools directly from our plant in Guangdong to machine shops, distributors and OEMs in Southeast Asia and Europe — one contract, one quality standard, one service contact.

02

Own brand, own factory

CNCfact machines are designed, assembled and test-cut in our own plant. No trading markup and no anonymous OEM badge — direct engineering support and a consistent build standard.

03

Geometry checked, not promised

Every machine is aligned and test cut before shipment, and the accuracy record travels with it. If the machine does not cut to the agreed tolerance on your part, we fix it.

04

Engineering team on call

Application engineers support fixture design, cutting parameters, programming and operator training — in English, before and after delivery.

05

Certifications you can audit

ISO 9001 and ISO 14001 management systems, CE-marked machines and a documented quality record for every order — available for your audit before you place a PO.

06

After-sales that answers

Spare parts from stock, remote diagnostics by video or remote session, and on-site commissioning when the machine needs it. Downtime is measured in hours, not weeks.

07 — How we work

A clear process, from first enquiry to first part.

No black boxes. You know what happens at each stage, who is responsible and what you receive before the next payment is due.

  1. 01

    Enquiry & drawing review

    Send drawings, material and volumes. We confirm feasibility and the right machine platform within 24 hours.

  2. 02

    Proposal & quotation

    Machine configuration, tooling, process plan and a firm price — itemised, with delivery time and payment terms.

  3. 03

    Order & scheduling

    Contract, deposit and a production schedule with named contacts on both sides and weekly progress updates.

  4. 04

    Build & in-process QC

    Assembly, alignment and test cuts, with dimensional and accuracy records at every stage of the build.

  5. 05

    Pre-shipment inspection

    Final accuracy report, packing list and photo documentation before dispatch — approved by you.

  6. 06

    Delivery & support

    Shipping, installation, commissioning and operator training, then lifetime technical support and spare parts.

08 — Newsroom

Machine tools, machining and the shop floor.

Technical notes, exhibition dates and company updates from our engineering and export teams.

All news