FIVE-AXIS SERIES
LV-Series Vertical Five-Axis Machining Centers
LV-856 vertical five-axis machining centers: rotary cradle with ±120° A-axis, BT40 direct-drive spindle, for impellers, blades and complex surfaces.
View detailsHIGH-PRECISION SERIES
A vertical machining center is the general-purpose machine in most shops: it mills faces, pockets and profiles, and it does it with a spindle that can take both roughing and finishing cuts. The V-series is built around the part of that job that decides the finish — the rigidity of the bed and the stiffness of the spindle nose.
When a cut is heavy and the direction changes, the machine has to absorb the inertia or the surface shows it. The V-series bed is designed for high-G cutting, and the short-nose spindle keeps the tool close to the support.
Figures are as published for this series — final values are confirmed on the quotation for the model you order.
| Item | V-8 | V-866 | V-1165 |
|---|---|---|---|
| Worktable travel (X) | 800 mm | 800 mm | 1,100 mm |
| Saddle travel (Y) | 500 mm | 600 mm | 650 mm |
| Spindle box travel (Z) | 500 mm | 600 mm | 650 mm |
| Spindle nose to table | 90–630 mm | 110–680 mm | 100–730 mm |
| T-slot (slots – width x pitch) | 5 – 18 x 84 | 5 – 18 x 72 | 5 – 18 x 120 |
| Motor power | 7.5 / 11 kW | 11 kW | 11 kW |
| Spindle speed | 12,000 rpm | 12,000 rpm | 8,000 rpm |
| Spindle diameter | Ø140 | Ø150 | Ø150 |
| Cutting feed range | 1–10,000 mm/min | 1–10,000 mm/min | 1–10,000 mm/min |
| Rapid traverse (X/Y/Z) | 48 m/min | 36 m/min | 24 m/min |
| Tool capacity | 24 | 24 | 24 |
| Dimensions (L x W x H) | 2400 x 2150 x 2500 | 2600 x 2500 x 2600 | 3200 x 2700 x 2900 |
Mould plates, cavity inserts, die cores, machine frames, pump and valve bodies, fixture plates and hydraulic blocks — parts with several faces and tolerances that must hold between them.
Send the part drawing, the material and the faces you need machined, and we will confirm the travel, the spindle taper and the fixture that matches it.
Tooling & configuration
Heavy and interrupted cuts on steel and cast iron — holders chosen for rigidity, not just reach.
Not sure what you need? Send the part drawing, the material and the batch size — we return a tooling list and a configured machine price, both on the same quotation.
QUOTE REQUEST
V-Series High-Precision Vertical Machining Centers
INDUSTRIES
Parts we build these machines around, quoted from your drawing.
Brackets, housings and drivetrain parts machined in one setup.
Aluminium frames, middle plates and heat sinks with fine surface requirements.
Battery trays and module structures with long, flat surfaces to hold tolerance.
Core and cavity work where contour accuracy drives the final finish.
Compressor housings, motor casings and steel panels produced in volume.
Hinges, handles and fasteners machined from bar stock, finished evenly.
HOW WE WORK
Six steps, each with a document you can hold us to.

A drawing, a 3D file or a sample part is enough to start.

Our engineers match the part to the right machine family and quote it.

Spindle, travel, tooling and control options confirmed in writing.

Assembly, wiring and a test cut on your part before shipment.

Export packing, documentation and on-site commissioning support.

Operator training, spare parts and remote diagnostics after the sale.
TECHNICAL DATA SHEET
Series datasheet · PDF, 1 page
Tell us where to send follow-up questions and the PDF opens immediately. No newsletter, nothing shared.
Used to follow up on this request only. See our privacy policy.