CNCFACT Machine Tools

Trial cut, training, retrofit and process support — before and after you buy.

Application engineering · test cut · documents · online support

Technical Service

TECHNICAL SUPPORT

Technology keeps moving.
So do we.

A machine is only half of the answer. The other half is the drawing review, the fixture, the tooling list and the person who picks up the phone when a cycle time does not match the quote.

  • Application engineers review the part before a machine is proposed.
  • Remote diagnostics on every machine we ship, with the control parameters on file.
  • Retrofit and upgrade — new spindle, tooling, probing or data link on machines already in the plant.
Engineers reviewing a part drawing Machine assembly check
Answers inside one working day 24h

RESPONSE

Answers inside one working day

Send a drawing, a photo of the fixture or a cycle-time question. An application engineer replies with a machine suggestion, not a price list.

Fifteen years of fixes, not features 15

YEARS

Fifteen years of fixes, not features

Every family we sell has been through generations of shop-floor corrections — the kind that only show up after thousands of hours in a customer plant.

A real part cut before you decide 7d

TEST CUT

A real part cut before you decide

We clamp your part, cut it on the machine we are proposing and send back the cycle time, the inspection report and the video.

TECHNOLOGY EVOLUTION

From 1.0 to 4.0 — what changed on the floor

Four industrial revolutions, one direction: less hand work, more measurable output.

1.0

1780s

Mechanisation

Water and steam drive the first machines. The operator sets the depth by hand and the part is checked with a caliper.

2.0

1910s

Electrification

Electric motors and assembly lines split the work into steps. Dedicated machines repeat one operation all day.

3.0

1970s

Automation

CNC, PLC and the first machining centres. Programs replace hand wheels and the tool changer replaces the operator’s hand.

4.0

2010s

Connectivity

Machines report tool life, spindle load and alarms over the network, so a problem is diagnosed before it becomes a stop.

WHERE WE ADD VALUE TODAY

Industry 4.0 is not a brochure word here

  • Tool life data — the machine logs the wear curve so the next tool change is planned, not reactive.
  • Spindle load monitoring — a rising load curve flags a dull tool before the part is scrap.
  • Remote screen share — a commissioning or alarm question is solved with the control screen shared, not a phone description.
  • Data out — cycle counts and alarms exported to the MES or to a simple CSV if that is what the plant runs.

ONLINE TEST CUT

Send the part. Get a cut part back.

Four steps, no cost before step 02, and the decision is made on measurements — not on a catalogue photo.

Test cut on a machine before shipment
TEST CUTCut on production tooling
  1. 01

    Send the part

    A drawing, a 3D file or a sample part. Include the material and the tolerance that actually decides the part.

  2. 02

    Feasibility & fixture

    We check tool reach, clamping and the number of setups, then confirm which machine family fits before any cost is quoted.

  3. 03

    Test cut

    Your part is machined on the proposed machine with production tooling — not with a demo aluminium block.

  4. 04

    Report & sample back

    Cycle time, inspection measurements, photos and video come back with the cut part, so the decision is based on evidence.

You get back

  • Cycle-time breakdown per operation
  • Inspection report (CMM or gauge, with the drawing balloons)
  • Photos and a short video of the cut
  • The machined part itself, shipped back on request

YOUR REQUIREMENTS

Tell us the numbers that decide the machine

Table size, configuration and control system are the three answers that change a quotation most. Everything else we can confirm afterwards.

Table & envelope

  • Table size (mm)
  • Travel X / Y / Z
  • Max workpiece weight

Configuration

  • Spindle taper and speed
  • Tool capacity
  • Coolant: flood or through spindle

Control & software

  • Fanuc / Mitsubishi / other
  • 4th axis and probing
  • MES or data connection

Site & utilities

  • Power supply V / phase / Hz
  • Compressed air
  • Floor space and crane capacity
DOCX Technical requirement sheet Editable form — fill in and send back with the drawing

Quick requirement form

The button opens your email client with everything filled in. Prefer WhatsApp? Send it there instead →

DOCUMENTS

Machine data sheets, ready to forward

One page per family: travel, table, spindle, tooling and accuracy. Print it for the meeting, or send it to your customer.

PDF T-6 / T-650 / T-7 / T-850 · technical data sheet · 1 page

High-Speed Drilling & Tapping Centers

PDF V-8 / V-866 / V-1165 · technical data sheet · 1 page

High-Precision Vertical Machining Centers

ONLINE SUPPORT

Someone who knows the machine, on the other end

Alarm code, tooling question, commissioning check — write, call or share the control screen. We keep the machine's parameter file on record, so the answer does not start with “which model again?”.

Mon–Sat · 08:30–20:00 (GMT+8) · emergency line for machines under commissioning