DRILLING & TAPPING SERIES
T-Series High-Speed Drilling & Tapping Centers
T-650 class drilling and tapping centers: 48 m/min rapids, 20,000 rpm direct-drive spindle and a 21-tool servo magazine for hole-heavy parts.
View detailsTURN-MILL SERIES
A turn-mill center puts a lathe and a small machining center on one bed. Parts that are mostly round but carry flats, cross holes or milled slots come off complete, without a second clamping and without the runout that comes with it.
The saving is not only the second machine — it is the datum. Once the part stays in the chuck, the milled feature is concentric to the turned diameter by construction, not by indicating. And because the spindle can index and hold, the same machine cuts three-, four-, five-, six- and seven-sided forms.
Figures are as published for this model — final values are confirmed on the quotation.
| Spindle speed range | 0–4,000 rpm |
|---|---|
| Spindle through hole | Ø66 mm |
| Bar capacity (drawn tube) | Ø52 mm |
| Spindle type | A2-6 |
| Max. swing over bed | Ø500 mm (depends on turret) |
| Max. turning diameter | Ø270 mm |
| X-axis travel | 260 mm |
| Z-axis travel | 600 mm |
| Rapid traverse (X / Y / Z) | 25 / 15 / 25 m/min |
| Spindle motor power | 17 kW |
| Power head motor | 2.3 kW |
| Tool stations | 12 / 15 |
Valve stems, sensor bodies, connector shells, motor shafts, fastener blanks and electronic hardware — round parts that also carry flats, slots or a multi-sided head.
Send the part drawing with the polygon and the bar size, and we will confirm the spindle, the tool stations and the polygon capability for your form.
Tooling & configuration
Turned parts with milled and multi-sided features — static and live holders on the same turret.
Not sure what you need? Send the part drawing, the material and the batch size — we return a tooling list and a configured machine price, both on the same quotation.
QUOTE REQUEST
CK-Series Turn-Mill Centers
INDUSTRIES
Parts we build these machines around, quoted from your drawing.
Brackets, housings and drivetrain parts machined in one setup.
Aluminium frames, middle plates and heat sinks with fine surface requirements.
Battery trays and module structures with long, flat surfaces to hold tolerance.
Core and cavity work where contour accuracy drives the final finish.
Compressor housings, motor casings and steel panels produced in volume.
Hinges, handles and fasteners machined from bar stock, finished evenly.
HOW WE WORK
Six steps, each with a document you can hold us to.

A drawing, a 3D file or a sample part is enough to start.

Our engineers match the part to the right machine family and quote it.

Spindle, travel, tooling and control options confirmed in writing.

Assembly, wiring and a test cut on your part before shipment.

Export packing, documentation and on-site commissioning support.

Operator training, spare parts and remote diagnostics after the sale.
TECHNICAL DATA SHEET
Series datasheet · PDF, 1 page
Tell us where to send follow-up questions and the PDF opens immediately. No newsletter, nothing shared.
Used to follow up on this request only. See our privacy policy.