CNCFACT Machine Tools

CASE STUDY Automotive

Valve bodies, four-up fixture on a VMC

A four-station fixture that turned a single-part valve body job into a four-part cycle, with the operator loading outside the machine.

The valve body has ports on three sides, so the original process used three setups and a lot of indicating. Spindle time was less than half of the shift.

The four-station fixture puts the ports at 0°, 90° and 180° in one clamping, and a second plate is loaded while the first is cutting. Setup time dropped from 40 minutes to 12.

Spindle time went up 62%, and the shop now quotes this family with a cycle time it can actually hold.

← All customer cases