FIVE-AXIS SERIES
LV-Series Vertical Five-Axis Machining Centers
LV-856 vertical five-axis machining centers: rotary cradle with ±120° A-axis, BT40 direct-drive spindle, for impellers, blades and complex surfaces.
View detailsFIVE-AXIS SERIES
A five-head machine does not compete with a machining center on flexibility. It competes on parts per hour. Five spindles cut the same small features on five work stations at once, and because each head carries its own small tool, the cycle contains no tool changes at all.
On small parts with a short cycle, the tool changer is the bottleneck. With five heads, five parts come off in the time a single-spindle machine finishes one — provided the parts are small, the cutting volume is light and the features repeat.
Figures are as published for this model — final values are confirmed on the quotation.
| Worktable travel (X) | 640 mm |
|---|---|
| Saddle travel (Y) | 420 mm |
| Spindle box travel (Z) | 400 mm |
| Spindle nose to table | 485 mm |
| Spindle center to column | 475 mm |
| Table to plate height (horizontal) | 260 mm |
| Worktable size | 700 x 420 mm |
| Table load | 300 kg |
| T-slot (slots – width x pitch) | 3 – 14 x 105 |
| Spindle power | 3.2 kW x 5 |
| Spindle speed | 24,000 rpm |
| Spindle diameter | Ø100 |
| Dimensions (L x W x H) | 1860 x 2250 x 2300 |
Watch cases and bezels, jewellery, e-cigarette bodies, small hardware fittings, stone-inlay panels and decorative parts. The pattern: a small part, a short cycle, a light cut and a volume that justifies five spindles.
Send a sample part and the volume you need per month, and we will design the five-station clamping and quote the machine around it.
Tooling & configuration
Five light cuts at once — clamping and tooling are designed around the part, one station per spindle.
Not sure what you need? Send the part drawing, the material and the batch size — we return a tooling list and a configured machine price, both on the same quotation.
QUOTE REQUEST
T-Series Five-Head Five-Axis Machine
INDUSTRIES
Parts we build these machines around, quoted from your drawing.
Brackets, housings and drivetrain parts machined in one setup.
Aluminium frames, middle plates and heat sinks with fine surface requirements.
Battery trays and module structures with long, flat surfaces to hold tolerance.
Core and cavity work where contour accuracy drives the final finish.
Compressor housings, motor casings and steel panels produced in volume.
Hinges, handles and fasteners machined from bar stock, finished evenly.
HOW WE WORK
Six steps, each with a document you can hold us to.

A drawing, a 3D file or a sample part is enough to start.

Our engineers match the part to the right machine family and quote it.

Spindle, travel, tooling and control options confirmed in writing.

Assembly, wiring and a test cut on your part before shipment.

Export packing, documentation and on-site commissioning support.

Operator training, spare parts and remote diagnostics after the sale.
TECHNICAL DATA SHEET
Series datasheet · PDF, 1 page
Tell us where to send follow-up questions and the PDF opens immediately. No newsletter, nothing shared.
Used to follow up on this request only. See our privacy policy.