CNCFACT Machine Tools

TURN-MILL SERIES

CK-Series Turn-Mill Centers

A turn-mill center puts a lathe and a small machining center on one bed. Parts that are mostly round but carry flats, cross holes or milled slots come off complete, without a second clamping and without the runout that comes with it.

Where it wins

The saving is not only the second machine — it is the datum. Once the part stays in the chuck, the milled feature is concentric to the turned diameter by construction, not by indicating. And because the spindle can index and hold, the same machine cuts three-, four-, five-, six- and seven-sided forms.

  • Shafts, piston rods and valve stems with flats or cross holes
  • Fasteners and fittings that need a milled port on a turned body
  • Brass, copper and aluminium electrical parts with multi-sided heads
  • Batch work where a second setup would double the handling

Standard features

  • Turning and multi-sided forming combined on one machine — outer diameter turning, drilling, parting and polygon turning in one cycle, with high concentricity and one machine doing several jobs
  • Bed and bed foot cast as one piece, finished by sanding, with imported roller linear rails and ball screws: good shock resistance and strong cutting force
  • Spindle positioning set per product, so any polygon can be cut — three-, four-, five-, six-, seven-sided and irregular forms in one cycle
  • With the polygon function switched off, the same machine runs as a high-precision CNC lathe

Typical specifications

Figures are as published for this model — final values are confirmed on the quotation.

Spindle speed range 0–4,000 rpm
Spindle through hole Ø66 mm
Bar capacity (drawn tube) Ø52 mm
Spindle type A2-6
Max. swing over bed Ø500 mm (depends on turret)
Max. turning diameter Ø270 mm
X-axis travel 260 mm
Z-axis travel 600 mm
Rapid traverse (X / Y / Z) 25 / 15 / 25 m/min
Spindle motor power 17 kW
Power head motor 2.3 kW
Tool stations 12 / 15

What you can add

  • Bar feeder and part catcher for unattended bar work
  • Live driven holders, radial and axial
  • Sub-spindle for back-end work in the same cycle
  • Collet system and soft jaws for bar stock
  • High-pressure coolant for deep-hole drilling

Typical parts

Valve stems, sensor bodies, connector shells, motor shafts, fastener blanks and electronic hardware — round parts that also carry flats, slots or a multi-sided head.

What we check before shipping

  • Concentricity between the turned diameter and the milled feature
  • Polygon form accuracy across the range of sides you run
  • Spindle positioning repeatability after a full index cycle
  • A test cut on your part, including the parting operation

Send the part drawing with the polygon and the bar size, and we will confirm the spindle, the tool stations and the polygon capability for your form.

Tags

TURN-MILL SERIES CNC machine tool OEM & custom builds Series Turn Mill

Tooling & configuration

Tooling and configuration — what we fit before it ships.

Turned parts with milled and multi-sided features — static and live holders on the same turret.

Tooling刀具

  • OD/ID turning holders
  • Live driven holders, radial and axial
  • Polygon turning holders
  • Threading and grooving inserts
  • Collet system for bar work

Configuration配置

  • Control: Fanuc / Mitsubishi / Siemens (your choice)
  • Spindle taper: VDI / BMT turret, live tooling
  • Tool changer: 12–15 stations with driven holders
  • Coolant through spindle (optional)
  • Chip conveyor and enclosure
  • Voltage and plug to your plant standard

Fixtures夹具

  • Collet system for Ø52 bar
  • 3-jaw and soft jaws
  • Sub-spindle for back work (optional)
  • Bar feeder and part catcher (optional)

Not sure what you need? Send the part drawing, the material and the batch size — we return a tooling list and a configured machine price, both on the same quotation.

GET A QUOTE

Tell us the part. We quote the machine.

Reply within one working day · FOB Shanghai / Ningbo · test cut before shipment

INDUSTRIES

Where these machines earn their keep

Parts we build these machines around, quoted from your drawing.

Automotive & e-mobility

Automotive & e-mobility

Brackets, housings and drivetrain parts machined in one setup.

Consumer electronics

Consumer electronics

Aluminium frames, middle plates and heat sinks with fine surface requirements.

New energy

New energy

Battery trays and module structures with long, flat surfaces to hold tolerance.

Mould & die

Mould & die

Core and cavity work where contour accuracy drives the final finish.

Home appliances

Home appliances

Compressor housings, motor casings and steel panels produced in volume.

Hardware & tools

Hardware & tools

Hinges, handles and fasteners machined from bar stock, finished evenly.

HOW WE WORK

From drawing to a machine on your floor

Six steps, each with a document you can hold us to.

Send the part
01

Send the part

A drawing, a 3D file or a sample part is enough to start.

Machine selection
02

Machine selection

Our engineers match the part to the right machine family and quote it.

Configuration
03

Configuration

Spindle, travel, tooling and control options confirmed in writing.

Build & test cut
04

Build & test cut

Assembly, wiring and a test cut on your part before shipment.

Shipping & install
05

Shipping & install

Export packing, documentation and on-site commissioning support.

Training & service
06

Training & service

Operator training, spare parts and remote diagnostics after the sale.