CNCFACT Machine Tools

TURNING SERIES

CP-Series Power Turret Lathes

A power turret lathe is the machine you buy when the cut is heavy and the part is hard. The turret indexes under servo control, the base is cast in resin sand, and the spindle is supported by precision bearings — three things that decide whether the machine still holds size after a thousand parts.

Where it wins

Hard material and a large depth of cut put force into the bed. A resin-sand cast base resists that force with less deformation, so the machine keeps its accuracy through a heavy-cutting cycle instead of drifting as the casting flexes.

  • Hardened shafts and pins turned after heat treatment
  • Hydraulic and pneumatic fittings with heavy wall sections
  • Parts with a large depth of cut and a tight roundness requirement
  • Volume work where tool-change time is part of the cost

Standard features

  • Base cast in resin sand: strong shock resistance, minimal machine deformation, accuracy and stability retained during heavy cutting
  • Spindle motor is a variable-frequency motor — speed changed in real time
  • High-precision spindle on high-precision bearings, particularly suited to high-hardness and heavy-cut parts
  • Large-stroke tailstock with stable speed and stable thrust; the slide runs on precision-grade ball screws
  • High power, fast running speed, strong rigidity, servo-type tool change for overall accuracy

Typical specifications

Figures are as published for this model — final values are confirmed on the quotation.

Max. swing over turret Ø450 mm
Max. bar diameter Ø52 mm
Spindle through hole Ø66 mm (material through Ø52 mm)
Spindle type A2-6
Spindle taper MT-5
Max. spindle speed 4,000 rpm
Spindle motor power 11 kW
X / Z rapid traverse 24 m/min
X / Z servo motor power 2.4 kW
Chuck and rotary cylinder 8 inch
Repeat positioning accuracy (X / Z) ±0.003 mm
Positioning accuracy (X / Z) ±0.003 mm

What you can add

  • Bar feeder and part catcher
  • Live tooling on the turret for cross holes and flats
  • Chip conveyor and high-pressure coolant
  • Tailstock centre and steady rest for long parts
  • Automatic tool wear compensation and tool life monitoring

Typical parts

Hardened shafts, hydraulic fittings, bearing rings, pins, bushings and valve bodies — parts where the cut is heavy and the diameter has to stay round.

What we check before shipping

  • Roundness and cylindricity on a heavy test cut
  • Turret index repeatability across all stations
  • Spindle thermal growth over a warm-up cycle
  • Accuracy retained after a sustained heavy-cutting run

Send the material, the hardness and the depth of cut you run, and we will confirm the spindle, the turret and the tooling that holds size on it.

Tags

TURNING SERIES CNC machine tool OEM & custom builds Series Power Turret

Tooling & configuration

Tooling and configuration — what we fit before it ships.

Hard material and heavy depth of cut — the tooling has to survive the force, not just the size.

Tooling刀具

  • Heavy-duty OD turning holders
  • Ceramic and CBN inserts for hardened work
  • Grooving and threading holders
  • Live driven holders (optional)
  • Boring bars for deep bores

Configuration配置

  • Control: Fanuc / Mitsubishi / Siemens (your choice)
  • Spindle taper: MT-5 spindle, servo turret
  • Tool changer: Servo turret, live tooling optional
  • Coolant through spindle (optional)
  • Chip conveyor and enclosure
  • Voltage and plug to your plant standard

Fixtures夹具

  • 8-inch 3-jaw chuck and soft jaws
  • Collet system for bar stock
  • Steady rest for long parts
  • Tailstock centre

Not sure what you need? Send the part drawing, the material and the batch size — we return a tooling list and a configured machine price, both on the same quotation.

GET A QUOTE

Tell us the part. We quote the machine.

Reply within one working day · FOB Shanghai / Ningbo · test cut before shipment

INDUSTRIES

Where these machines earn their keep

Parts we build these machines around, quoted from your drawing.

Automotive & e-mobility

Automotive & e-mobility

Brackets, housings and drivetrain parts machined in one setup.

Consumer electronics

Consumer electronics

Aluminium frames, middle plates and heat sinks with fine surface requirements.

New energy

New energy

Battery trays and module structures with long, flat surfaces to hold tolerance.

Mould & die

Mould & die

Core and cavity work where contour accuracy drives the final finish.

Home appliances

Home appliances

Compressor housings, motor casings and steel panels produced in volume.

Hardware & tools

Hardware & tools

Hinges, handles and fasteners machined from bar stock, finished evenly.

HOW WE WORK

From drawing to a machine on your floor

Six steps, each with a document you can hold us to.

Send the part
01

Send the part

A drawing, a 3D file or a sample part is enough to start.

Machine selection
02

Machine selection

Our engineers match the part to the right machine family and quote it.

Configuration
03

Configuration

Spindle, travel, tooling and control options confirmed in writing.

Build & test cut
04

Build & test cut

Assembly, wiring and a test cut on your part before shipment.

Shipping & install
05

Shipping & install

Export packing, documentation and on-site commissioning support.

Training & service
06

Training & service

Operator training, spare parts and remote diagnostics after the sale.