HIGH-PRECISION SERIES
V-Series High-Precision Vertical Machining Centers
V-8 class vertical machining centers: rigid bed for high-G cutting, short-nose spindle, 24-tool magazine and three-axis rapids to 48 m/min.
View detailsFIVE-AXIS SERIES
A five-axis machining center exists for one class of work: a surface that cannot be reached by indexing three axes. Impellers, blades and propellers are the classic cases — the tool has to stay normal to a curved surface while the part turns under it.
Five-axis positioning lets the tool reach the surface at the right angle instead of the nearest reachable angle. The result is a shorter tool, less vibration, a better finish, and one clamping for features that would otherwise need several.
Figures are as published for this model — final values are confirmed on the quotation.
| Three-axis travel (X / Y / Z) | 800 x 550 x 600 mm |
|---|---|
| Worktable size | Ø260 / Ø320 mm |
| Spindle specification | BT40, Ø150 long-nose direct drive |
| Spindle end to table surface | 50–650 mm (with 200 mm riser block) |
| Five-axis cradle | DTR260-500 |
| A-axis travel (tilt) | ±120° |
| A-axis max. speed | 189 rpm |
| A-axis rated torque | 259 N·m |
| A-axis positioning accuracy | ±8 arcsec |
| A-axis repeat positioning | ±5 arcsec |
| C-axis max. speed | 386 rpm |
| C-axis repeat positioning | ±5 arcsec |
Impellers, turbine and compressor blades, marine propellers, complex mould cavities, medical and aerospace components, and any part whose surface has to be cut normal to the tool.
Send the part model and the surface you need to cut, and we will confirm the cradle, the spindle and the programming support that comes with the machine.
Tooling & configuration
Five-axis surfaces — short, rigid tools cut better than long reach, so holder selection follows the CAM path.
Not sure what you need? Send the part drawing, the material and the batch size — we return a tooling list and a configured machine price, both on the same quotation.
QUOTE REQUEST
LV-Series Vertical Five-Axis Machining Centers
INDUSTRIES
Parts we build these machines around, quoted from your drawing.
Brackets, housings and drivetrain parts machined in one setup.
Aluminium frames, middle plates and heat sinks with fine surface requirements.
Battery trays and module structures with long, flat surfaces to hold tolerance.
Core and cavity work where contour accuracy drives the final finish.
Compressor housings, motor casings and steel panels produced in volume.
Hinges, handles and fasteners machined from bar stock, finished evenly.
HOW WE WORK
Six steps, each with a document you can hold us to.

A drawing, a 3D file or a sample part is enough to start.

Our engineers match the part to the right machine family and quote it.

Spindle, travel, tooling and control options confirmed in writing.

Assembly, wiring and a test cut on your part before shipment.

Export packing, documentation and on-site commissioning support.

Operator training, spare parts and remote diagnostics after the sale.
TECHNICAL DATA SHEET
Series datasheet · PDF, 1 page
Tell us where to send follow-up questions and the PDF opens immediately. No newsletter, nothing shared.
Used to follow up on this request only. See our privacy policy.