CNCFACT Machine Tools

CASE STUDY Mould & die

Mould cores roughed and finished on a gantry mill

A 1.2-tonne mould core where roughing and finishing now happen on the same gantry machine, with the contour left to a single finishing pass.

The core used to be roughed on an older bed mill and then moved to a second machine for finishing, which meant a re-clamp and a re-datum for every core. Contour mismatch showed up as a step that had to be polished out by hand.

With the gantry machine the core is roughed, semi-finished and finished in one clamping. The three finishing passes follow a constant step-over, and the operator only checks the depth of the cavity and the parting line before release.

Nine hours per core came off the routing. The shop now books the gantry for finishing work only, and the bed mill handles the roughing of the next core in parallel.

← All customer cases