CNCFACT Machine Tools

Coolant management that lowers cost per part

Most coolant failures are concentration failures. A sump drifting from 8 percent to 4 percent loses lubricity and invites bacteria, and the resulting tool wear costs far more than the refractometer that would have prevented it.

A weekly routine

Measure concentration at the nozzle, not at the tank. Skim tramp oil every week, and change the sump on a schedule tied to hours run rather than to smell.

Watch the foam

Foam usually means soft water, high pressure or contamination. Fixing the cause is cheaper than adding defoamer every shift.

We supply a coolant log template with each machine and can advise on water treatment for your region.