CNCFACT Machine Tools

Tool wear signals you can hear before you see

Sound changes before surface finish does. A worn carbide insert produces a higher, more uniform tone as the flank contact area grows, and the change is audible over the normal cutting noise.

A two-minute shift routine

Run the first part of the shift with the door closed and listen at the same spindle load each time. Note the pitch. When it rises without a change in cutting parameters, inspect the insert corner under a loupe.

Log the load, not just the time

Tool life measured in minutes ignores material variation. Logging spindle load against part count shows the real trend, and most controllers will export it without extra software.

Spare insert corners are cheap. A scrapped finishing pass on a large part is not. We include a tool-life sheet with every machine we ship.