Five checks before you call a CNC spindle misaligned
When a machine starts cutting oversize or leaving chatter marks, the spindle is the first suspect and usually the last thing that is actually wrong. Before you schedule a technician, work through these five checks. In our service experience, four out of five cases are resolved here.
1. Confirm the measurement, not the symptom
Cut a test part and measure it with a calibrated instrument at a stable temperature. A part measured straight out of the coolant can read 10–15 µm different from one measured at 20 °C.
2. Check the tool and holder first
Run-out at the tool tip should be measured, not assumed. A worn collet or a damaged holder taper can add more error than the spindle itself.
3. Look at the fixture and clamping force
Thin parts move when they are released. If the error disappears when the part is measured while still clamped, the machining process is fine and the fixture needs attention.
4. Review the warm-up cycle
Spindle growth is repeatable when the warm-up is repeatable. Machines that start cold and run at full speed within two minutes will drift for the first hour.
5. Read the thermal and accuracy logs
Laser interferometer and ball-bar records from commissioning give you a baseline. Comparing today with that baseline tells you whether the machine has moved — and by how much.
When it really is the spindle
If run-out is confirmed at the taper, with a known-good holder and a stable machine temperature, stop cutting and contact us. We will review the alarm history and accuracy records remotely before sending a technician, so the visit is planned rather than exploratory.